.webp?unique=31e11e5)
.webp?unique=31e11e5)
Product Advantages:
- High-Quality Material: Made from food-grade polypropylene for safety.
- Universal Compatibility: Fits 10-inch filter cartridges for water purification.
- Leak-Proof Sealing: Equipped with heavy-duty O-rings to prevent leakage.
- Durable Design: Corrosion-resistant and impact-proof for long-lasting performance.
- Easy Installation: Simple DIY setup with standard plumbing connections.
- Supports High Flow Rate: Maintains optimal water pressure without restriction.
- Ideal for Home & Business: Suitable for domestic, industrial, and commercial water filtration.
- Pressure Resistance: Can withstand up to 90 PSI water pressure.
Highlights & Specifications
| Feature | Details |
|---|---|
| Product Type | 10-Inch Filter Blue Housing |
| Material | Food-Grade Polypropylene |
| Compatible Filters | 10-inch sediment, carbon, and RO filters |
| Inlet/Outlet Size | 1/2-inch, 3/4-inch, or 1-inch options |
| Maximum Pressure | Up to 90 PSI |
| Flow Rate | Supports up to 10 GPM (Gallons Per Minute) |
| Color | Blue Housing with Transparent or Opaque Options |
| Seal Type | Heavy-duty O-Ring Seal |
| Application | Home, Industrial, Commercial |
Product Customer Care Number
For assistance, contact our customer care team at 8800199166 or email us at care@hydrosoft.in .
Product Related Do’s & Don’ts
Do’s:
- Use only 10-inch compatible filter cartridges.
- Inspect and replace the O-rings periodically to ensure proper sealing.
- Install in an area protected from direct sunlight to extend the housing lifespan.
- Check for proper water flow direction before installation.
Don’ts:
- Do not exceed the maximum pressure limit (90 PSI).
- Avoid over-tightening connections, which can damage the housing.
- Do not use with hot water applications unless specified.
- Avoid using incompatible filters that can restrict water flow.
Product Repair Troubleshoots
- Leaking Housing: Check O-rings, tighten housing cap properly, and replace seals if needed.
- Low Water Flow: The filter may be clogged; replace or clean it.
- Water Leaking from Threads: Use Teflon tape on pipe connections for a better seal.
- Cracked Housing: Replace immediately to avoid further damage.
Product Service Guide & Future Service Schedule
- Every 3 Months: Check for leaks, cracks, and pressure drops.
- Every 6 Months: Replace filter cartridges and inspect O-rings.
- Annual Check: Assess housing durability and replace if necessary.
Product Installation Guide
- Turn Off Water Supply: Shut off the main water source before installation.
- Prepare Housing: Ensure the O-ring is in place for leak-proof sealing.
- Insert the Filter Cartridge: Use a 10-inch compatible filter.
- Connect Pipes: Securely attach inlet and outlet connections.
- Tighten the Housing: Use a wrench, but do not overtighten.
- Flush the System: Run water for 5-10 minutes to clear air and debris.
- Check for Leaks: Ensure all connections are properly sealed.
Frequently Asked Questions (FAQs)
Q1: What filters can I use with this housing?
A1: It is compatible with 10-inch sediment, carbon, and RO filters.
Q2: How often should I replace the O-ring?
A2: Every 6 months or when leaks occur.
Q3: Can this housing be used for hot water?
A3: No, it is only designed for cold water applications.
Q4: Why is my housing leaking?
A4: Ensure the O-ring is properly seated and all connections are tightened.
Q5: What is the maximum pressure rating?
A5: Up to 90 PSI.
Q6: Is this housing suitable for whole-house filtration?
A6: Yes, it can be used in whole-house water filtration setups.
Q7: Where can I purchase replacement filters?
A7: Available on our official website and through authorized distributors.